Energy Management

Blue Jay Technology Co. Ltd is a high-tech enterprise. Focused on the design, manufacture and marketing of the electronic product, computer control equipment, communications and network equipment. Company offers products and solutions ranging from measuring and electrical control, quality and metering to power factor correction and temperature monitor.

W-3000

W-3000

SPECIFICATION
- Power Supply: AC / DC 80-270V, 45-65Hz, DC 20-60V (Optional), Maximum power consumption 6W
- Wireless Remote Sensing Unit: Standard type 3-12*
- Temperature monitor range: From 0°C ~ 99 °C
- Wireless communication frequency: 315MHZ or 433MHZ
- Transmit power: Less than 10mW
- Distance of the receiver and monitor: Up to 80m (260 foot)
- Battery life: 3-5 years (Every fifteen minutes to send a data)
- Work environment Temperature: -20℃~ +125℃  Humidity: RH 20%~95%(No condensation)
- Protection   Panel: IP40
- Storage Conditions: Temperature: -25℃~+60℃  Humidity: RH 20%~95%  
Models: W3000-3S W3000-6S W3000-9S W3000-12S

This wireless monitor monitor device use 433Mhz connection, only fix remote probe to electrical junction or any other place that need detect temperature. Inside battery can support max 3 years working, do not need especial wiring in existing installed switchgear.

MCM 1000

MCM 1000

MODELS:
BJ-MCM1300: Basic parameter for 6 channels three phasewith RS485 port
BJ-MCM1310: Advanced parameter for 6 channels three phase With 6DI/2DO With RS485 With LCD screen panel unit
BJ-MCM1100: Basic parameter for 18 channels single phase with RS485 port
BJ-MCM1110: Advanced parameter for 18 channels single phase With 6DI/2DO With RS485 With LCD screen panel unit

MCM1000 series meter is 2017 year new public products it design for sub-metering project. integrate 6pcs three phase energy meter(MCM1300) or 18pcs single phase energy meter(MCM1100) inside with different MCU for energy data collect. Can maximum reduce the hardware investment of electrical management or building energy metering project.

192U/192I

192U/192I

FEATURES:
• Accuracy class 0.5
• Display 1/3 lines 4 digits and 1 decimal 0~9999
• Standard Input; Current: 1A 5A; Voltage: 100~380V
• Overloading capability Continuous: 1.2 times
• Instantaneous: Current 10 times(5s) voltage 2 times(1s)
• Frequency: 50Hz±10%
• Power Supply: AC/DC 85~265V; AC 220V± 10%
• Power Consumption≤4VA
• Dielectric strength 2KV (Test voltage : AC RMS)
• Insulating property ≥100MΩ
• MTBF ≥30000h
• Operation condition:
Temperature: -10°C ~ 50°C
Relative humidity: ≤95%RH free of corrosive gas Altitude ≤2500m Operating temperatur -10~55°C Storage temperature -20~70°C Safety Input and power supply>2kV Input and output >2kV Power supply and output>1.5kV
MODELS:
BJ-192I-9X1 Single phase ammeter, BJ-192U-9X1 Single phase voltmeter, BJ-192I-9X4 Three phase ammeter, BJ-192U-9X4 Three phase voltmeter

Economy Type digital panel meter especially developed for indication and supervision of the electrical circuit can replaces an analogical panel meter with keyboard can switching measurement range and protection of the parameters of programming by password. Ideal for reducing installation manpower and optimizing the used one of spaces in the panel.

S-XX

S-XX

FEATURES:
• Low Temp. drift. Auto zero calibrating
• Over-current protection for input current (50mA)
• Current output can be set inverse proportional output
• Programmed by USB or adapter w/o external power supply
• Back board designed with redundant power-supply interfaces
MODELS:
BJ-S12 Support variety of signal input, BJ-S12A Standard 4(0)-20mA input with Input loop support 26V..18V power, BJ-S12B Standard 4(0)-20mA input, BJ-S12T TC(KESBRJTN) or mV(-80-+80mV) V(0-1V) input, BJ-S12R RTD (PT100, PT200, PT500, PT1000, Cu50) or R(0-400Ω. 0-4000Ω) input.

Our company offers dozens of models are now available signal isolator to meet your needs. Select from single and dual-channel models with AC, DC, or loop-powered operation. Signal splitters deliver dual outputs from a single source. Optical or galvanic isolation eliminate ground loop errors, reduce noise, and block high voltage transient surges. Our multi-channel modules reduce costs and save space. Models with push-button calibration simplify installation and maintenance tasks. Units with mini USB port preset for 4-20mA input/output required.

HVD

HVD

FEATURES:
• Three phases controlled separately.
• Complete safety protection with built in voltage limiting device.
• Allow to check the operating switchgear with the function tester.
• Screened coaxial cables as connecting leads.
• For indoor electric devices with rated voltage: >1 kV
• Signal situations: Threshold voltage: 4~5 V Uo<10% Un, no voltage signalling (alternative) Uo>15% Un, voltage signalling Uo>45% Un, normal voltage signalling
• Connecting lead: 1~12 m
• Ambient temperature range: -25~+55°C
• Safe voltage for interface:< 30 V
• Protective system: IP42 (IP54)
• Dimensions (WxHxD):96 x 48 x 110 mm, cut dimensions on panel: 91 x 44 mm
• Adapted sensors: Capacitive insulators with 10pF (40.5kV), 15pF (24kV), 20pF (12kV), 40pF(7.2kV), etc.

HVD high voltage indicator is adapted for indoor electrical panel, used in MV / HV switchgear. It is connected via internal wiring to capacitive sensors inside the switchgear. Rated voltage 3~40.5kv, operation frequency 50Hz network to display the electrifying situation of the high voltage loop where the device is mounted. This integrated voltage detecting system is used for continuous operation. The condition “voltage present” is displayed by three LED indicator.

DT Series

DT Series

FEATURES:
• Supports the following Windows OS:   Windows 98SE   Windows ME   Windows 2000 SP4   Windows XP SP2 and above (32 & 64 bit)   Windows Server 2003 (32 & 64 bit)   Windows Server 2008 / 2008 R2 (32 & 64 bit)   Windows Vista (32 & 64 bit)   Windows 7 (32 & 64 bit)
• Package included:   1x USB to RS232 Cable
MODELS:
DT-5001, DT-5002, DT-5010, DT-5012, DT-5031, DT-5031

The USB interface is equipped with silica gel coverthereby preventing dust small debris paste and can play the anti air corrosion oxidation. Interface and pin with 24K gold plating process with three kinds of signal lamp show working condition.

F96-S

F96-S

Features:
Measuring Voltage: AC53V 100V 220V 380V 415V
Frequency Range:40-70 Hz
Ambient temperature range:-25C to +55C
Panel size :72x72mm , 96x96mm, 144x144mm
Automatic control: with relay output or without relay output  
Model: F72-S/SR, F96-S/SR, F144-S/SR

Indicating the status if power generator and network are synchronized ,When the voltage and frequencies in between power generator and network is consistency, rotation of LED Roulette will be slowed down until the SYNC LED is on.Both system can be synchronized and connect the generator to the power network.

MCM400

MCM400

FEATURES:
Class 0.2/0.5 basic parameter and class 1 for active energy, 4 channels three phase metering Current measuring 100mA or 333mV, Standard 35mm -4 module, DIN rail mounting, Provide RS-485 MODBUS-RTU Communications, With LCD screen on the meter body panel mount, Optional TOU record for each monitor channels Accept customization design.
MODELS: BJ-MCM400V, BJ-MCM400A

MCM400 meter is 2017 year new public products, it design for sub-metering project. It integrate 4pcs three phase energy meter, inside with different MCU for energy data collect. Can maximum reduce the hardware investment of electrical management or building energy metering project.

QP-A/V

QP-A/V

FEATURES
• Input signal:   Voltage: 110V / 220V / 380V optional   Current: 1A / 5A optional
• Output:   0-5V / 0-10V / 4-20mA / 0-20mA optional
• RMS measurement and output
• Accuracy 0.2 class
• 35mm Din rail mounting / wall mounting
• Sharp size 55x75x120mm  
MODELS: BJ-QPV AC Voltage transducer, BJ-QPA AC Current transducer, BJ-DPV DC Voltage transducer, BJ-DPA DC Current transducer

This single type transducer it adpots microcontroller technology as the core using the latest algorithms to achieve precise measurement. QP series transducer converts an ac voltage input into a load independent output signal. Excellent temperature characteristic and good working stability. The output signal is based on the a root mean square(rms) measurement of the input signal and hence the transducer can be used with distorted waveforms.

CG3-10

CG3-10

SPECIFICATION:
- Power frequency withstand voltage: 65kV/1min
- Partial discharge: 26.4kV
- Lighting impulse voltage: 125kV
- Vitrification point: 105

The following lised insulation sensor all use epoxy vacuum pouring technology for one-time molding production. The bushing contact box insulating cylinder etc. insulating parts use AGP technology for molding. also use SMC DMC Unsaturated polyester enlargement mode plastic for compacting molding. All the product are applied to 3.6~40.5KV MV/HV switchgear Blue Jay accept customerized order for some specification size.

USR-TCP232-410s

USR-TCP232-410s

FEATURES
• Supply the protocol for VIP customers.
• Provide PC TCP/IP SOCKET programming example VB C++ Delphi Android IOS.
• A built-in web page also parameter setting via web can customize web pages for users.
• Can also set via UDP broadcast provide the set up protocol.
• Reload button a key restore default Settings.
• RJ45 status indicator light RJ45 interface built-in isolation transformer 2 KV isolation.
• The global unique MAC address bought from IEEE the user can define MAC address (please state when you make order).
• Support upgrade firmware via network.
• Support visit IP and domain name at the same time.

USR-TCP232-410 is a dual serial server which supports RS232 and RS485 working at the same time. It adopts Cortex-M4 solution and its basic frequency is up to 120MHz. And the internal of the serial server integrates TCP/IP protocol stack.

192P/192Q

192P/192Q

FEATURES
• Accuracy class 0.5
• Display 1/3 lines 4 digits and 1 decimal 0~9999
• Standard Input Current: 1A/ 5A(with CT); Voltage: 100V (with PT) / 450V
• Overloading capability Continuous: 1.2 times
• Instantaneous: Current 10 times(5s) voltage 2 times(1s)
• Frequency: 50Hz±10%
• Power Supply: AC/DC 85~265V; AC 220V± 10%
• Power Consumption≤4VA
• Dielectric strength 2KV (Test voltage : AC RMS)
• Insulating property ≥100MΩ
• MTBF ≥30000h

Economy Type digital power meter meter is a precise device of measuring active power of the energy consumption system in real time can replaces an analogical panel meter users can get clear information of which part needs to improve effective management and control of energy. With keyboard can switching measurement range and protection of the parameters of programming by password. Ideal for reducing installation manpower and optimizing the used one of spaces in the panel.

CP-S96

CP-S96

SPECIFICATION:
Measuring Voltage: AC53V 100V 220V 380V 415V
Frequency Range: 50Hz,60 Hz
Panel size :72x72mm , 96x96mm  
Model: CP-S72, CP-S96

In two single-phase or three-phase power network systems,indicating the status when power generator and network are synchronized.Rotation of indication disc will slow down until the pointer stop at (inverted triangle) sign .Both system can be synchronized and connect the generator to the power network.

193UI

193UI

MODELS:
BJ-193I-9X1 Single phase ammeter
BJ-193U-9X1 Single phase voltmeter
BJ-193I-9X4 Three phase ammeter
BJ-193U-9X4 Three phase voltmeter
BJ-193UI-1 Single phase volt and amp meter
BJ-193UI-3 Three phase volt and amp meter Accept customer design

Especially developed for indication and supervision of the low-medium voltage three phase electrical network measurement also can be used in DC circuit. It can replaces other analogical panel meter reducing installation manpower and optimizing the used one of spaces in the panel. Ideal for protection of single-phase networks is monitored and generally to own alarm superior and inferior. Protection of the parameters of programming by password.

DCEM

DCEM

FEATURES:
0.5 class for basic parameter
85~265VDC/AC power supply for most application (accept customized)
4 channels Voltage/Amp/Power/Energy(Et/E+/E-) measurement
Max 31 days energy data for each channels Energy
Hall CT signal input (+/-15V AUX, 0-4V input)
With RS485 Modbus-RTU
35mm Din-rail mounting
Optional 4DI / 2DO for signal detect and remote control
Accept customization design

DCEM multi-channel DC power measurement terminal is a device used for measuring 4 channels of DC electrical parameters. It can visually display voltage current power data and energy cumulative data. In the front panel keypad it can set voltage display parameters and the hall CT ratio to expand measurement range. With RS-485 interface, MODBUS-RTU protocol, can be connected to the monitoring center. It is a high-performance automatic meter suitable for UPS system detect Solar energy plant monitor industrial and mining enterprises civil construction building automation etc.

QP-A/V(T)

QP-A/V(T)

FEATURES:
• Input signal:
Voltage: 110V / 220V / 380V optional
Current: 1A / 5A optional
• Output: 0-5V / 0-10V / 4-20mA / 0-20mA optional
• RMS measurement and output
• Accuracy 0.5 class
• Minimum thickness of size (T type)
• 35mm Din rail mounting
• Sharp size:23x92x135mm
• RS485 port optional
MODELS:
BJ-QPV(T) AC Voltage transducer, BJ-QPA(T)AC current transducer, BJ-DPV(T) DC Voltage transducer, BJ-DPA(T) DC current transducer

This single type transducer it adpots microcontroller technology as the core using the latest algorithms to achieve precise measurement. QP series transducer converts an ac voltage input into a load independent output signal. Excellent temperature characteristic and good working stability. The output signal is based on the a root mean square(rms) measurement of the input signal and hence the transducer can be used with distorted waveforms.

HZYN-9700

HZYN-9700

FEATURES:
• Use of the environment: -10 C ~ C less than 95% RH
• Storage environment: -40 C ~ 80 C less than 95% RH
• Dielectric strength: between the shell and terminal > AC2000V
• Insulation: > 100MΩ between the shell and terminal
• Working power: DC110V / DC220V / AC220V
• Operating Current: less than 30mA
• Power: AC/DC85~265V

Switchgear Intelligent Control Device is an advanced solution for 3-35kV indoor switchgear. Not only inherited the ISPCI function also add the control switch and multiple protection features. The compact panel structure easy for installation and maintenance Unique voice alarm prompts improve the safety performance.

USR-GPRS-730

USR-GPRS-730

FEATURES:
• RS232 or RS485 interface, can’t be used at one time
• 2G Frequency: GSM850/900,DCS1800/1900, 2G GSM/GPRS
• Work Mode: TCP and UDP Client
• Supports register packet and heartbeat packet
• Can be remote configurated via SMS
• Support multi work modes : SMS transmission mode,network transmission mode and HTTPD mode
• Support basic instruction set and extension instruction set
• Hardware flow control RTS/CTS

USR-GPRS232-730 GSM Modem / GPRS DTU (Data Transfer Unit) is a wireless terminal equipment which can convert serial data to IP data or convert IP data to serial data through gprs /GSM network. 730 is based on USR-GM3. Clients can use this product to realize bidirectional transparent transmission from serial port to network through simple AT command.

193PQ

193PQ

FEATURES:
• Display 1/3 lines 4 digits and 1 decimal 0~9999 with one LED indicate unit Kilo/Million
• Power Supply: AC/DC 85~265V; AC 220V± 10%
• Power Consumption≤4VA
• Dielectric strength 2KV (Test voltage : AC RMS)
• Remote Output RS485 MODBUS-RTU (optional)
• Free to configuration Alarm Output implementation (optional)
• Relay Output 3A/250VAC 50/60Hz 5A/30VDC (optional)
• Input   Voltage: Rated 100/400V   Current: Rated 5A (optional 1A)   Frequency: 45-65Hz
• Overload   Current: 2 times rated continuous; 10 seconds for 10 times the rated   Voltage: 2 times the rated continuous; 10 seconds for 600V  
MODELS: BJ-193PQH-9X4 96*96*71mm
BJ-193PQH-3X4 80*80*71mm
Accept customer design

Combination Type of digital power meter 193PQ meter can display active power and reactive power in one screen is a precise device of measuring power data of the energy consumption system in real time can replaces an analogical panel meter users can get clear information of which part needs to improve effective management and control of energy. With keyboard can switching measurement range and protection of the parameters of programming by password. Ideal for reducing installation manpower and optimizing the used one of spaces in the panel.

194Q-9SY

194Q-9SY

FEATURES:
Class 0.2 for basic parameter
Display 3 lines 4 digits and 1 decimal 0~9999
Current measuring 5 or 1 A
Voltage measuring 100V or upto 450V direclty
ITF Technology: galvanic insulation protection inputs outputs
Universal series power supply (85~265VAC/DC)
Replace the three-phase power meter three phase electricity transmitter
Transformers generators capacitors and electric motors distributed detection
Colorful TFT screen display English character (accept other language versions customized)
THD and harmonic individual measurement
Provide multi- tariffs energy data record
With RS485 port MODBUS to set programming and read the data.
Optional I/O port: 4 digital input & 2 digital output for alarm trig
Optional AO port: 1 analog output for basic parameter

194Q is a high-end multifunction power analyzer manufactured by Blue Jay. higher measurement accuracy and powerful functions. With its four direct access keys and TFT displays friendly full text interface helps user operate device more easy in 3P3W or 3P4W LV installation. All monitored data is available via a digital RS485 communication port running Modbus Protocol. It can be used as a data gathering device for an intelligent Power Distribution System or Plant Automation System. Provide Harmonic measurement with multi-tariff record user can easy establish accounting standards for different time. Max 52th harmonic individual monitor let user clear grasp of the present electrical grid quality.

QP-X

QP-X

FEATURES:
• Input signal:   Voltage: 110V / 220V / 380V optional   Current: 1A / 5A optional
• Output:   0-5V / 0-10V / 4-20mA / 0-20mA optional
• RMS measurement and output
• Used in 3-phase AC circuit
• Three channel output related to each phase parameter
• 35mm Din rail mounting / wall mounting
• Sharp size 110x75x120mm  
MODELS: BJ-QPVX  Three phase voltage transducer
BJ-QPAX  Three phase current transducer
BJ-QPW   Three phase  active power transducer
BJ-QPK    Three phase reactive power transducer
BJ-QPKW Three phase active and reactive power combined transducer
BJ-QPCX  Three phase combine transducer (4 channels output, with RS485, Accept customer order)

This three phase type transducer it adopts microcontroller technology as the core using the latest algorithms to achieve precise measurement. QP-X series transducer converts an ac voltage input into a load independent output signal. Excellent temperature characteristic and good working stability. The output signal is based on the a root mean square(rms) measurement of the input signal and hence the transducer can be used with distorted waveforms.

195PM

195PM

SPECIFICATION:
Isolation Insulation Resistor: >100MΩ
"AC 2.0 KV for 1 min Between Power / Input / Output / Case
≥100M ohm at 500Vdc Between Power / Input / Output
EMC standard EN 55011:2002; EN 61326:2003
Communication port
Digital link: RS485 MODBUS-RTU Other:
Ambient Temp. / Humi.: 0 ~ 55 C / ≦93% RH
Dimensions: 96*48*72mm
Install hole: 94*44mm

195PM panel meter is desigend as Multi-use instrument accepet variety of signal input. With a panel keypad user can freely programmable for zero scale and full scale. with large brightness LED screen it can visually display any physical data from measuring sensor. Optional RS485 communication interface 195PM can be connected to the monitoring center. It is a low cost display meter suitable for industrial and mining enterprises civil construction building automation.

194J-9SY

194J-9SY

MODELS:
194J-9SY (ver 1.x stopped production)
Size:96x96x71mm
With fire alarm function (24V DI port)
194J-9SY (ver 3.x)
Size:96x96x71mm
2015 new type cancel fire alarm function with more measurement parameter

New 194J series Smart Power Manager is the more powerful meter than 194Y series power analyzer. With higher precision and more measurement parameters. With its four direct access keys and LCD displays helps you use all the parameters in 3P3W or 3P4W LV installation. This meter is the latest series meter developed in 2015 by Blue Jay Technology. It is the ideal choice for monitoring and controlling of power distribution systems.

194Y-9SY

194Y-9SY

MODELS:
BJ-194Y-9SY (ver 1.X)
Size:96x96x71mm
Standard RS485 protocol
BJ-194Y-9SY (ver 2.X)
Size:96x96x71mm
Special RS485 protocol for BOS1000 software

194Y-9SY is a three phase electrical network power quality detection device provide energy consumption and generate; THD (Total Harmonic Distortion); Harmonic individual data reading. It is the ideal choice for monitoring and controlling of power distribution systems. With its four direct access keys and LCD displays helps you use all the parameters in 3P3W or 3P4W LV installation. Build-in 4 tariffs energy logger function with onboard memory can record last three month energy data free to set max 12 segment record period can be use as a commercial billing unit.

QPPX

QPPX

FEATURES:
• Input signal:   Voltage: 110V / 220V / 380V optional   Current: 1A / 5A optional
• Output:   4 channels free for configuration via keypad
• User free to programmable transducer parameter
• RMS measurement and output
• With keypad and LCD screen for display and configuration
• Used in AC 3 Phase circuit 
• 35mm Din rail mounting
• With RS485 port MODBUS-RTU
Ordering notice:
must confirm output for mA or V signal, if no specify parameter, Blue Jay Tech will random presets value and parameter, and marked in side sticker

QPPX electrical transducer measures a wide range of electrical parameters and generates analog or digital output signals suitable for interfacing with instrumentation and control systems. Total four channel output with panel key or PC control programmable user can free to set 4 different data from max 26 electrical parameter for sampling and analog signal output. Have three channel digital inputs and optional RS485-Modbus communication functionality. Can monitor the galvanically isolated AO signal and programmed the transducer with customized SCADA software. Any of the measured parameters can be read out via the optional RS485-Modbus connection.

194Z-9SY

194Z-9SY

FEATURES:
• Replace the three-phase power meter three phase electricity transmitter
• Transformers generators capacitors and electric motors distributed detection
• Medium and low pressure systems
• SCADA EMS DCS integrators
• With RS485 port MODBUS to set programming and read the data.
• Optional I/O port: 4 digital input and 2 digital output for alarm trig
• Optional AO port: 1 analog output for basic parameter.
MODELS: 194Z-9SY Size:96*96*71mm and 194Z-3SY Size:80*80*71mm

194Z-9SY is advance multifunction power meter manufactured by Blue Jay. It is the ideal choice for monitoring and controlling of power distribution systems. Provide RS-485 communication port easy for user connect to PLC and build SCADA system. High measurement accuracy(0.5) and system stability it is cost effective ideal for OEMs and panel builders solution. With its four direct access keys and LCD displays (Option LED display screen) helps you use all the parameters in 3P3W or 3P4W LV installation.

194L-ASY

194L-ASY

FEATURES:
; • Class 0.5 for basic power parameter
• Display 3 lines 4 digits and 1 decimal 0~9999 • Current measuring 5 or 1 A
• Voltage measuring 100V or upto 450V direclty
• ITF Technology: galvanic insulation protection inputs outputs
• With RS485 port for communication
• Universal series power supply (85~265VAC/DC)
•Parameter measured in power grid: Current, Voltage, Frequency, Active power, Reactive power and Energy Power factor MODELS:
BJ-194L-ASY 72x72x71mm

194L series mini power meter cancel some advanced features of BJ-194Z series network multifunction power meter with compact size display all basic electrical parameter. With lower cost effective choice for most electrical monitor application. based on this power meters you can simply set up a monitoring system with the IPC and central software. It can replace the traditional analog or many digital measurement instruments (such as ammeter voltmeter power meter power factor meter frequency meter etc.) with the advantages of improving system reliability making the on-site wiring convenient and reduce system cost. Optional digital I/O port and with serial port BJ194L-ASY mini multi-function meter can connect with PC; and use Modbus to set programming and read the data.

194E-9S4

194E-9S4

FEATURES:
• Class 0.5 for basic power parameter
• Display 3 lines 4 digits and 1 decimal 0~9999
• Current measuring 5 or 1 A
• Voltage measuring 100V or upto 450V direclty
• ITF Technology: galvanic insulation protection inputs outputs
• Universal series power supply (85~265VAC/DC)
• Parameter measured in power grid: Current, Voltage, Frequency, Active power, Reactive power and Energy Power factor
MODELS: 194E-9S4, Size: 96x96x93mm,Three Line LED display and 194E-9SY, Size:96x96x93mm, Three Line LCD display

Low cost solution for power line parameter monitor standard with LED disply. visual display of the modt commonly used data. It is widely used in Metering of distribution feeders transformers generators capacitor banks and motors.

Follow Us